BCJQD - MOBILMET 24

  • MSDS: BCJQD
  • Manufacturer: MOBIL OIL CORP
  • Product Name: MOBILMET 24
  • National Stock Number: 9150-00N003227
Product Identification

Product ID:MOBILMET 24
MSDS Date:01/01/1985
FSC:9150
NIIN:00N003227
MSDS Number: BCJQD

Responsible Party
MOBIL OIL CORP.

Emergency Phone: 212-883-4242

Cage: 3U278

Contractor
MOBIL OIL CORP.
FAIRFAX, VA 22037 US

Telephone: 1-800-662-4525

Cage: 3U278

Ingredients

OIL, COMPOUNDED AND SULFURIZED

Fraction By Weight: >75%


ADDITIVES

Fraction By Weight: <5%


MINERAL OIL (EXPOSURE REGULATED AS 'OIL MIST')

CAS: 8012-95-1

RTECS: PY8030000

Fraction By Weight: <20%

OSHA PEL 5 MG/M3

ACGIH TLV: 5 MG/M3/10 STEL;9192

Hazards

Effects of Overexposure:SKIN:SLIGHT IRRIT. EYE:SLIGHT IRRIT.

First Aid

First Aid:SKIN:WASH W/SOAP & WATER. INHAL:REMOVE FROM EXPOSURE. IF
UNCON SEEK MEDICAL AID IMMED. GIVE ARTIF RESP IF NEC. INGEST:IF
UNCOMFORTABLE SEEK MEDICAL AID. EYE:FLUSH W/ WATER FOR 15 MINUTES.

Fire Fighting

Flash Point:340F; 171C, COC
Extinguishing Media:CO*2, FOAM, DRY CHEM
Fire Fighting Procedures:WEAR SELF-CONT BREATH APPAR
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:ABSORB ON FIRE RETARDANT TREATED
SWDUST,DIATOMACEOUS EARTH, OR OTHER ABSORBENT SHOVEL UP & DISPOSE
OF IN APPROVED HAZARDOUS WASTE DISPOSAL FACILITY.

Exposure Controls

Respiratory Protection:NONE UNDER ORDINARY CONDITIONS OF USE. (MFR)
Ventilation:ADEQUATE VENTILATION REQUIRED
Protective Gloves:IMPERVIOUS
Eye Protection:RECOMMENDED
Other Protective Equipment:USE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health
VP:<0.1. RELATIVE DENSITY:0.87 AT 15/4C.

Chemical Properties

Boiling Pt:B.P. Text:>600F;316C
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN LIQUID MILD ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:STRONG OXIDATION
Hazardous Decomposition Products:CO

Disposal

Waste Disposal Methods:MFR RECOMMEND DISSSOLVING WASTE IN FLAMMABLE
SOLVENT & DISPOSING BY SUPERVISED INCINERATION. DISPOSAL METHOD
MUST BE IAW FED, STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.